- AVAILABILITY: IMMEDIATE | Ships in 24/48h ore
- Model: Platesx10
- SKU: Pl/10
Satisfaction guaranteed • 14-day money back
Fast & tracked shipping 24/48h
WhatsApp support +39 371 5178427
Steel-backed photopolymer plates for pad printing, pack of 10
Steel-backed photopolymer plate for pad printing, developed with alcohol. You use it to make the cliché the pad picks the ink up from: you expose your design in the UV exposure unit and wash the plate with alcohol.
Total thickness is 0.52 mm and the surface is very hard (90 Shore D), so the plate handles long runs of over 50,000 prints and also works on sealed ink cup machines such as our K-1 pad printing machine.
Size 100 x 200 mm. Pack of 10 plates. Also available: single plate, pack of 3 plates and pack of 5 plates.
What you get with this plate
- Fine detail: reproduces screens up to 150 lines/cm and tones from 5% to 95%, so small text and thin lines print clean.
- Even solids: the plate releases the ink well onto the pad and solid areas print with full coverage.
- Long life: over 50,000 prints from the same cliché.
- Inks: works with solvent-based and UV pad printing inks.
How to make the cliché
- Exposure: place the film with your design in contact with the plate and expose it in the UV exposure unit for 1-5 minutes. The exact time depends on the lamps. If the design has solid areas, also expose a raster film: this keeps ink in the large areas too, so the solid prints evenly.
- Development: wash the plate with alcohol for about 2 minutes, using a soft brush. The alcohol dissolves the unexposed photopolymer and leaves the design etched.
- Post-exposure: put the plate back in the exposure unit for 8-10 minutes, without the film. The photopolymer hardens completely and the cliché lasts longer.
If it's your first time, our guide shows you step by step how to make pad printing plates yourself.
Technical data
| Type | Photopolymer plate for pad printing clichés |
| Size | 100 x 200 mm |
| Base | Steel |
| Colour of the blank plate | Red |
| Total thickness | 0.52 mm |
| Hardness | 90 Shore D |
| Etch depth | 0.020 mm (20 µm) |
| Tonal range | 5-95% |
| Maximum screen | 150 lines/cm (380 lpi) |
| Main exposure | 1-5 minutes |
| Development | Alcohol |
| Post-exposure | 8-10 minutes |
| Plate life | Over 50,000 prints |
| Inks | Solvent-based and UV |
| Ink system | Also suitable for sealed ink cups |
| Technology | Analogue, with film |